Cell voltage tap wiring harnesses

The Orion BMS is populated in increments of 12 cell groups and the wiring harness options are available to match those increments. When ordering through the website, the correct wiring harness for any model of the Orion BMS will be ordered.  The wiring harnesses are available with 12 cell, 24 cell and 36 cell configuration per connector. If an 84 cell BMS is ordered, cell groups 1, 2, 3, 4, 5, 6 and 7 are populated and therefore the cell voltage tap wiring harness connectors included would be 2 of the 36 cell harnesses and one 12 cell harnesses for a total of 84 cells.

Cell voltage tap wiring harnesses are available either as 6 foot (1.8 meter) lengths or 12 foot (3.6 meter) lengths and are terminated in cut wire without any terminals. The wires are 22 AWG stranded and appropriate crimps should be used with them.

Cell voltage tap wiring harnesses are in ⅝”, ½” or ⅜” convoluted tubing.  The convoluted tubing may be cut or discarded depending on the application requirements.

   
Cell voltage tap harness - 12 cell
Cell voltage tap harness - 36 cell

Standard 12 Cell Harness Configuration (1 group)
Standard 24 Cell Harness Configuration (2 group)
Standard 36 Cell Harness Configuration (3 group)